Additional information |
- The hole of the water inlet valve is located on both sides of the boiler tank
- The high level toilet uses a standard low level ( P2 ) vessel and a special high level flush, connected to a T30 CHR medium level flush pipe kit "The flushing mechanism is a C5 double rod flush pull flush".
- A special flush pipe kit is available that allows the cistern to be mounted on a wall next to the pan: Angled Flush Pipe Kit T34 CHR
- The low level wc can be used where the soil pipe is located on the floor. The pan can be placed over the soil pipe by cutting the horizontal flush pipe lengthwise. The height of the pan can be varied by cutting the vertical flushing pipe to length - maximum height is 2,380 mm up to the top of the pan, minimum height is 1,625 mm.
- Lower inlet valve (SP5A). The rear inlet valve is available as an option (SP511). P trap standard height pan - the height from floor to pan rim is 40 cm. Regal Height pan (rim height from floor to pan 48cm) available.
- Ceramic soil connection pipes : straight connector to the wall : C29. S trap connector bending down to the floor : C26
- The flush can be used with optional decorative brackets T32 CHR
- The high level wc can be used with standard Burlington toilet seats or with Throne seats (S14 & S15) supplied with floor fixing.
|
Reviews
There are no reviews yet.